BUILD 01 / CALEB'S PC / WINDOWS 11
Better
from boot.
A clear, considered BIOS setup for Caleb's gaming PC. Sixteen settings. Four sections. One stable system.
Begin configuration ↗Progress saves in your browser.0%0 / 16 DONE
BOARDASUS B550 WIFI II*
CPURYZEN 5 5500
GPURTX 5060 / 8GB
RAM16GB DDR4
PLATFORMAM4 / B550
OBJECTIVEStable FPS
RAM BASELINE3200 MT/s
OPERATING SYSTEMWindows 11
01 / THE PHILOSOPHY
Performance is a system. Stability is part of it.
Read before changing anything.
Confirm the physical motherboard label says TUF GAMING B550-PLUS WIFI II. Photograph existing BIOS settings, change a few at a time, and test that Windows boots. Save the BitLocker recovery key before firmware, TPM or Secure Boot changes. BIOS Wi-Fi enablement cannot replace a missing Windows driver.
02 / THE CONFIGURATION
Your checklist.
Open a row for its BIOS menu path and rationale. Tick each item after verifying it in firmware.
* Confirm the exact board variant. The Ryzen 5 5500 is PCIe 3.0 limited, and RAM above DDR4-3200 is not guaranteed stable. This page is an interactive reference, not software that changes BIOS settings. Checklist progress remains on this device only.
Apply. Test.
Then play.
- 01. Restart and press Delete repeatedly to enter UEFI BIOS.
- 02. Press F7 for Advanced Mode and verify each target.
- 03. Press F10 to review and save settings.
- 04. Check Windows, network connectivity and NVIDIA Resizable BAR status.
- 05. Test memory and gaming stability before further tuning.